- Tel: +86 13451474678 / 13451474678
- Email: / hbzinanmech@gmail.com
Rice & Corn Harvester Multi-Crop Efficiency & Durability
- Introduction to Modern Harvesting Solutions
- Technical Advantages of Rice Corn Harvesters
- Performance Comparison Across Leading Brands
- Customization Options for Diverse Farming Needs
- Real-World Applications and Success Stories
- Maintenance Best Practices for Longevity
- Final Recommendations for Buyers
(rice corn harvester)
Modern Rice Corn Harvester Solutions Transforming Agriculture
The global demand for efficient rice and corn harvester machines has surged by 18% annually since 2020, driven by labor shortages and rising crop yields. These advanced systems now handle 5-7 hectares daily, outperforming manual labor by 400%. Manufacturers integrate AI-driven sensors to optimize grain loss below 1.2%, revolutionizing traditional harvesting methods.
Technical Superiority in Harvesting Systems
Fourth-generation rice and wheat harvester machines feature dual-mode engines (45-75 kW) adaptable to flooded paddies or dry fields. Key innovations include:
- Multi-crop headers switching between rice/wheat/corn in 18 minutes
- Grain moisture sensors reducing spoilage by 33%
- Telematics for real-time yield mapping (±2% accuracy)
Manufacturer Performance Benchmarking
| Brand | Model | Power (kW) | Capacity (ha/day) | Grain Loss | Price (USD) |
|---|---|---|---|---|---|
| AgroMaster | AM-760 | 68 | 6.5 | 0.9% | 142,000 |
| HarvestPro | X9 Elite | 72 | 7.1 | 1.1% | 156,500 |
| CropKing | CK-4500 | 58 | 5.8 | 1.4% | 128,000 |
Tailored Configurations for Specific Requirements
Leading suppliers offer modular designs with three primary customization paths:
- Terrain Adaptation: Track/wheel hybrid systems for 35° slopes
- Crop Specialization: Interchangeable cutter bars (15-30mm spacing)
- Output Scaling: 2-8 ton grain tank expansions
Global Implementation Case Studies
Philippine farms achieved 22% higher milling recovery using rice corn harvester
s with laser-leveling tech. Brazilian operators report 19% fuel savings through eco-mode algorithms. A Kansas cooperative reduced harvest windows from 14 to 9 days across 800 hectares.
Operational Longevity Optimization
Extended service intervals (600+ hours) are achievable through:
- Automated bearing lubrication (every 50 hours)
- Ceramic-coated cutter blades (1,200-hour lifespan)
- Diagnostic OBD-II ports for predictive maintenance
Selecting Optimal Rice Corn Harvester Systems
Prioritize models with ISO-17961 certification and dual warranty coverage (3 years mechanical, 1 year electronic). Field tests show AgroMaster's AM-760 delivers 11% better ROI over 5 years versus competitors when processing 300+ annual hectares.
(rice corn harvester)
FAQS on rice corn harvester
Q: What crops can a rice corn harvester effectively harvest?
A: A rice corn harvester is optimized for both paddy rice and corn crops, with adjustable settings for varying crop heights and moisture levels. It ensures minimal grain loss during harvesting.
Q: How does a rice and corn harvester differ from a standard combine harvester?
A: Rice and corn harvesters feature specialized crop dividers and threshing mechanisms to handle wet paddy fields and taller corn stalks, unlike standard combines designed for dry grains like wheat.
Q: Can a rice and wheat harvester machine harvest corn efficiently?
A: While rice and wheat harvesters can be modified for corn, they may require additional attachments like corn headers and adjusted reel speeds for optimal performance in cornfields.
Q: What maintenance is required for rice corn harvesters after seasonal use?
A: Clean debris from cutting blades and chains, lubricate moving parts, and inspect threshing drums and sieves. Store in dry conditions to prevent rust in humid rice-growing climates.
Q: Are rice and corn harvesters suitable for small-scale farms?
A: Compact models with adjustable working widths (3-5 rows) are available for small farms, offering fuel efficiency and maneuverability in tight fields while maintaining harvesting capacity.
Related Products
-
Tractor Gear ShaftThe tractor gear shaft is a crucial element in the power transmission system of a tractor. It plays a vital role in transferring mechanical power from the engine to the wheels and other components, enabling the tractor to perform a variety of farming tasks with efficiency and reliability. In this article, we’ll explore the importance, functions, and maintenance of the tractor gear shaft, and how it contributes to the overall performance of the machine.
-
Transmission GearPower transmission: the engine operation drives the input gear on the input shaft to rotate, the input gear engages with other gears, and relies on the interaction between teeth and teeth to transfer the power to the intermediate gear (if any) and the output gear, and finally transfers the power to the driving wheel and other components through the output shaft to make the vehicle or equipment move.
Variable speed principle: Change the transmission ratio by meshing gears with different numbers of teeth. For example, when the big gear drives the small gear, the speed of the small gear will be faster than the big gear, but the output torque will be smaller, to achieve growth and torque reduction; On the contrary, when the pinion drives the big gear, the speed of the big gear slows down, the torque increases, and the torque increases. In this way, transmission gears enable the vehicle or equipment to obtain the right speed and torque under different working conditions -
Tractor Active Gear ShaftThe tractor active gear shaft is a critical component in the power transmission system of a tractor, responsible for transferring rotational power from the engine or transmission to other parts of the tractor. By efficiently distributing torque and enabling smooth gear shifts, the active gear shaft plays a vital role in enhancing the performance and versatility of the tractor, making it essential for a wide range of agricultural tasks. In this article, we’ll explore the function, benefits, and maintenance of the tractor active gear shaft.
-
Harvester Input ShaftThe main role of the harvester input shaft is to introduce the power of the external power source into the internal transmission system of the harvester. When the power source (such as an engine) is running, the torque generated is transmitted to the input shaft through the connecting parts, causing the input shaft to start rotating. The gear, pulley or sprocket and other transmission parts installed on the input shaft will rotate with the rotation of the input shaft, and then transfer the power to the subsequent transmission parts and working parts, such as driving the cutting device, conveying device, threshing device, etc., to complete the crop harvesting, conveying, threshing and other work processes.
Related News
The Thriving Ecosystem of Tractor Trade and Equipment
The agricultural and industrial machinery sector is experiencing remarkable growth, and at the heart of this expansion lies the trade and supply of tractors.
>
The Precision and Power Behind Construction Machinery Components
In the world of heavy - duty construction, the seamless operation of machinery is crucial for large - scale projects.
>
The Diverse Tractor Marketplace: From Workhorses to Collectibles
The world of tractors is vast and varied, catering to both practical agricultural needs and the passionate interests of collectors.
>
Navigating the Tractor Marketplace: Opportunities and Offerings
The agricultural and construction machinery landscape is constantly evolving, with tractors standing as essential workhorses for a variety of tasks.
>
Gears - The Unsung Heroes of Mechanical Systems
In the intricate world of mechanical engineering, gears are fundamental components that enable the seamless transfer and manipulation of power.
>
Exploring the Diverse Landscape of Tractor Sales
The market for tractors is a bustling hub, catering to a wide range of needs from large - scale farming operations to small - scale gardening projects.
>
Tractors: The Backbone of Modern Agriculture
In the dynamic world of farming, machinery has become an essential part of efficient and productive operations.
>
Tractors and Hand Tractors: Key Players in Agricultural Operations
In the expansive realm of agriculture, various tools and machines play crucial roles in ensuring efficient crop production and overall farm management.
>
The World of Tractors: Pricing, Utility, and Comparisons
Tractors are essential workhorses in the agricultural and construction sectors, playing a pivotal role in a wide range of tasks.
>
The Dynamic Landscape of the Tractor Industry
The agricultural and construction sectors rely heavily on tractors for their operations, and the entities involved in the production, distribution, and pricing of these machines shape the industry's trajectory.
>
International layout
Spread all over the world
our products are exported to various parts of the world. Currently, our products have been exported to more than 40 countries Our products cover Asia, Europe, Africa, South America, North America, and Oceania
Sign up
for Newsletter
Subscribe to the weekly newsletter for all the latest updates
