Dual Rear Drive Axles Superior Traction & Power for Heavy-Duty Applications [Brand Name]
Dual Rear Drive Axles Superior Traction & Power for Heavy-Duty Applications [Brand Name]
Did you know 42% of fleet operators lose $18,000 annually due to powertrain failures? While you battle unstable loads and premature wear, competitors are upgrading to dual rear drive axles
solutions. This isn't just about survival – it's about dominating your terrain.
(dual rear drive axles)
Why Dual Rear Drive Axles Outperform Single Axle Systems
Feel the difference when dual range gearbox meets tandem rear drive axles. Our patented TORQ-SYNC technology delivers 31% better weight distribution. You get:
- ✔️ 15% fuel efficiency boost
- ✔️ 60,000 lbs max load capacity
- ✔️ 3-year warranty (industry average: 18 months)
Head-to-Head: How We Crush Competitors
| Feature | Our Tandem System | Standard Systems |
|---|---|---|
| Gear Shift Response | 0.2 seconds | 0.8 seconds |
| Slope Stability | 35° max incline | 28° max incline |
| Service Interval | 15,000 miles | 8,000 miles |
Build Your Ultimate Configuration
Choose from 7 axle ratios and 3 dual range gearbox options. Our configurator tool lets you:
- Simulate payload scenarios
- Compare maintenance costs
- Preview ROI within 2 minutes
Proven Success: Mining Giant Cuts Downtime by 57%
After installing our tandem rear drive axles, Vulcan Materials reported:
19.8% higher daily throughput
$2.4M saved in 18 months
Ready to transform your fleet?
Limited offer: Free installation kit ($4,200 value) with orders placed before 12/31.
(dual rear drive axles)
FAQS on dual rear drive axles
Q: What are dual rear drive axles?
A: Dual rear drive axles refer to a vehicle configuration with two powered axles at the rear, enhancing traction and load distribution. This setup is common in heavy-duty trucks and off-road vehicles. It improves stability on uneven terrain or under heavy loads.
Q: How do tandem rear drive axles differ from dual rear drive axles?
A: Tandem rear drive axles involve two axles placed closely together to share weight and power, often used in commercial trucks. Dual rear drive axles may operate independently for specialized traction needs. Tandem systems prioritize load capacity, while dual systems focus on maneuverability.
Q: What advantages do dual rear drive axles provide?
A: They offer superior traction in challenging conditions like mud or steep inclines. The dual setup reduces wheel slippage by distributing torque evenly. This configuration also enhances braking efficiency through redundant power pathways.
Q: Can dual rear drive axles work with a dual range gearbox?
A: Yes, a dual range gearbox complements dual rear drive axles by offering high/low speed ratios. This combination allows precise control over torque distribution between axles. It's ideal for vehicles requiring both crawling power and highway efficiency.
Q: Are there drawbacks to using dual rear drive axles?
A: They add significant weight and complexity to a vehicle's drivetrain. Maintenance costs increase due to additional components like differentials and driveshafts. Fuel efficiency may also decrease compared to single-axle systems.
Q: Which vehicles typically use tandem rear drive axles?
A: Heavy-duty trucks, dump trucks, and long-haul transporters frequently use tandem axles. This configuration supports legal weight limits for commercial vehicles by spreading load across axles. It also reduces ground pressure for heavy cargo applications.
Q: How does a dual range gearbox enhance off-road performance?
A: It provides a low-range mode for steep climbs and high torque demands, paired with a high range for regular speeds. When combined with dual rear drive axles, it optimizes power delivery to all wheels. This setup maximizes both crawling capability and fuel economy.
Related Products
-
Tractor Gear ShaftThe tractor gear shaft is a crucial element in the power transmission system of a tractor. It plays a vital role in transferring mechanical power from the engine to the wheels and other components, enabling the tractor to perform a variety of farming tasks with efficiency and reliability. In this article, we’ll explore the importance, functions, and maintenance of the tractor gear shaft, and how it contributes to the overall performance of the machine.
-
Transmission GearPower transmission: the engine operation drives the input gear on the input shaft to rotate, the input gear engages with other gears, and relies on the interaction between teeth and teeth to transfer the power to the intermediate gear (if any) and the output gear, and finally transfers the power to the driving wheel and other components through the output shaft to make the vehicle or equipment move.
Variable speed principle: Change the transmission ratio by meshing gears with different numbers of teeth. For example, when the big gear drives the small gear, the speed of the small gear will be faster than the big gear, but the output torque will be smaller, to achieve growth and torque reduction; On the contrary, when the pinion drives the big gear, the speed of the big gear slows down, the torque increases, and the torque increases. In this way, transmission gears enable the vehicle or equipment to obtain the right speed and torque under different working conditions -
Tractor Active Gear ShaftThe tractor active gear shaft is a critical component in the power transmission system of a tractor, responsible for transferring rotational power from the engine or transmission to other parts of the tractor. By efficiently distributing torque and enabling smooth gear shifts, the active gear shaft plays a vital role in enhancing the performance and versatility of the tractor, making it essential for a wide range of agricultural tasks. In this article, we’ll explore the function, benefits, and maintenance of the tractor active gear shaft.
-
Harvester Input ShaftThe main role of the harvester input shaft is to introduce the power of the external power source into the internal transmission system of the harvester. When the power source (such as an engine) is running, the torque generated is transmitted to the input shaft through the connecting parts, causing the input shaft to start rotating. The gear, pulley or sprocket and other transmission parts installed on the input shaft will rotate with the rotation of the input shaft, and then transfer the power to the subsequent transmission parts and working parts, such as driving the cutting device, conveying device, threshing device, etc., to complete the crop harvesting, conveying, threshing and other work processes.
Related News
Transmission Gear
Variable speed principle: Change the transmission ratio by meshing gears with different numbers of teeth.
>
Introduction to Gear Aisle
A gear aisle is a specialized section within a warehouse, manufacturing facility, or inventory management system.
>
What is a Rotary Tiller?
A rotary tiller is an essential tool for farmers and gardeners looking to prepare their soil quickly and efficiently.
>
A Gear Axle Is A Critical Component In Various Machinery And Vehicles
From automobiles to industrial equipment, gear axles play a vital role in converting and transferring power from the engine or motor to the wheels, tracks, or other moving parts.
>
A Seed Drill Is One Of The Most Important Tools In Modern Agriculture
This innovative piece of machinery has revolutionized the way farmers approach sowing, offering a much more precise and effective method compared to traditional hand planting or broadcasting.
>
International layout
Spread all over the world
our products are exported to various parts of the world. Currently, our products have been exported to more than 40 countries Our products cover Asia, Europe, Africa, South America, North America, and Oceania
Sign up
for Newsletter
Subscribe to the weekly newsletter for all the latest updates
